San Jose Delta Associates, Inc.

MACOR® - Machinable Glass-Ceramic Code 9658, Rod, Sheet Price List

MACOR® Machinable Glass-Ceramic is a product of Corning Glass Works. San Jose Delta, authorized Stocking Distributor-Fabricator, converts the basic material into a wide range of standard sizes which allow the user to conveniently machine the final part. San Jose Delta can also custom-fabricate MACOR® Machinable Glass-Ceramic to the customer's drawing.

	ROUND ROD SIZES

	FRACTIONAL DIAMETER	DECIMAL DIAMETER & TOLERANCE	METRIC DIAMETER & TOLERANCE	BASE PRICE PER 3 INCH (76mm) LENGTH	BASE PRICE PER 6 INCH (152mm) LENGTH	BASE PRICE PER 12 INCH (304mm) LENGTH
TOLERANCE ON	1/8"	.125"	3.18	$35.00	$58.00	$96.50
ROD LENGTH:	3/16"	.188"	4.76	$34.00	$56.00	$93.00
Minus 1/16" (1.59mm)	1/4"	.250"	6.35	$36.50	$60.50	$100.00
plus an unspecified	3/8"	.375"	9.53	$37.50	$62.50	$104.00
amount	1/2"	.500"	12.7	$50.50	$84.50	$141.50
	5/8"	.625"	15.88	$73.50	$122.00	$203.00
	3/4"	.750"	19.05	$83.50	$138.00	$230.00
	1"	1.000"	25.4	$100.00	$166.50	$278.50
	1-1/4"	1.250"	31.75	$138.00	$230.00	$383.50
	1-1/2"	1.500"	38.1	$166.50	$277.00	$461.00
	2"	2.000"	50.8	$300.00	$500.50	$833.50
	3"	3.000"	76.2	$531.00	$886.00	$1477.50
	4"	4.000"	ITEM DISCONTINUED - CORNING NO LONGER PRODUCES
	6"	6.000"	ITEM DISCONTINUED - CORNING NO LONGER PRODUCES


	SHEET SIZES

FRACTIONAL THICKNESS	DECIMEL THICKNESS & TOLERANCE	METRIC THICKNESS & TOLERANCE	3" X 3" (76mm x 76mm)	3" X 6" (76mm x 152mm)	6" X 6" (152mm x 152mm)	3" X 12" (76mm x 152mm)	6" X 12" (152mm x 304mm)	12" X 12" (304mm x 304mm)
1/8"	.125"	3.18	$101.00	$169.00	$281.50	$281.50	$469.00	$782.00
1/4"	.250"	6.35	$129.50	$215.00	$357.00	$357.00	$596.00	$993.50
1/2"	.500"	12.7	$176.50	$295.00	$491.00	$491.00	$818.00	$1363.50
3/4"	.750"	19.05	$253.00	$422.00	$703.00	$703.00	$1172.00	$1953.50
1"	1.000"	25.4	$279.50	$465.50	$775.50	$775.50	$1292.50	$2153.00
1-1/4"	1.250"	31.75	$284.00	$472.00	$786.50	$786.50	$1310.00	$2183.50*
2"	2.000"	50.8	$425.00	$708.50	$1180.00	$1180.00	$1968.00	$3280.00*

TOLERANCE ON SHEET WIDTH & LENGTH:

We Accept

Minus1/16" (1.59MM), plus an unspecified amount

* Machining Stock - No Further Discount